General Assembly Instructions

Title/ LinkDuration

HARTING Service crimping tool

03:39

HARTING BUCHANAN crimping tool

05:37
HARTING Battery Hydraulic Crimping 01:52

HARTING IP 20 Assembly

03:26

Han-Yellock® Assembly instructions

Title/ LinkDuration

Han-Yellock® 30/60 Adapter Frame-Hood

This video shows the assembly of the modules in the Han-Modular® adapter frame and the insertion of the frame in the housing/carrier hood. The adapter frame can be assembled without any tools from the termination side and also from the mating side

00:32

Han-Yellock® 30/60 Adapter Frame-Housing

This video shows the assembly of the modules in the Han-Modular® adapter frame and the insertion of the frame in the housing/carrier hood. The adapter frame can be assembled without any tools from the termination side and also from the mating side.

00:34

Han-Yellock® Adapter Plate-Housing

This video shows the use of an adapter plate to conceal the old metal clips and the application of wall plugs.

00:31

Han-Yellock® Mixed Module-Hood

This video shows the use of a mixed-module. It shows the installation of a mixed module and in combination with a Han-Yellock® module.

00:22

Han-Yellock® Mixed Module-Housing

This video shows the use of a mixed-module. It shows the installation of a mixed module and in combination with a Han-Yellock® module.

00:24

Han-Yellock® Monoblock-Hood

This video shows the installation of the monoblock into the housing/carrier hood, the assembly of the contacts as well as the confirmation of the correct locking by an audible click. The modules can be assembled from both sides.

00:19

Han-Yellock® Monoblock-Housing

This video shows the installation of the monoblock into the housing/carrier hood, the assembly of the contacts as well as the confirmation of the correct locking by an audible click. The modules can be assembled from both sides.

00:13

Han-Yellock® PE Contact Chamber

This video shows the introduction of the PE contact chamber into the housing/carrier hood, the stripping of the cable and termination with the quick lock connector.

00:24

Han-Yellock® Protection Cover

This video shows the installation of the protection cover. This will protect the mating area against water and dust.

00:17

Han-Yellock® Removal Tools

This video shows the removal of the Han-Yellock® module, the monoblock housing and the adapter frame. With minimal effort it is possible to remove the modules.

00:40

Han-Yellock® Module-Hood

This video shows the installation of the Han-Yellock® module into the housing /carrier hood. The modules can be assembled from the mating side as well as from the mounting side. No tools are required to insert the modules.

00:32

Han-Yellock® Module-Housing

This video shows the installation of the Han-Yellock® module into the housing /carrier hood. The modules can be assembled from the mating side as well as from the mounting side. No tools are required to insert the modules.

00:31